| Residential or Commercial | Residential |  | |
| Installation Location | Indoor | | |
| Exhaust Type | 2-pipe Direct Vent (SV convertible) | | |
| Max Flow Rate | 10.1 GPM | | |
| Flow Rate @ 50°F Rise | 7.0 | | |
| Flow Rate @ 80°F Rise | 3.8 | | |
| Temperature Range | 100-140°F | | |
| Production Status | Active | | |
| Condensing | Yes | | |
| Minimum Activation Flow Rate | 0.5 GPM | | |
| Water Quality | Water Treatment may be needed | | |
| Freeze Protection | Yes | | |
| Freeze Protection Rating - Indoor Temp | -30°F | | |
| Freeze Protection Rating - Outdoor Temp | N/A | | |
| Recirculation Compatible? | Yes | | |
| New Generation Model Number | NRCP98 | | |
| Previous Name | N/A | | |
| Available Temperature Settings (with remote) | 100, 105, 110, 115, 120, 125, 130, 135, 140°F | | |
| Default Temperature Setting (without remote) | N/A | | |
| Default Temperature Program Setting Options (without remote) | N/A | | |
| Production Date Range | 10/14 - present | | |
| Min Gas Input (Btu) | 18000 | | |
| Max Gas Input (Btu) | 180000 | | |
| Height (in) | 28.7 | | |
| Width (in) | 17.3 | | |
| Depth (in) | 14.8 | | |
| Weight (lbs) | 85 | | |
| Thermal Efficiency | N/A | | |
| Energy Factor | UEF=0.94 | | |
| Afue | N/A | | |
| Quick-Connect Compatible? | No | | |
| Cold Water Connection Size (in) | 3/4 | | |
| Hot Water Connection Size (in) | 3/4 | | |
| Gas Connection Size (in) | 3/4 | | |
| Power Supply | 120 VAC | | |
| Current Draw (A) | 1.43 | | |
| Exhaust Vent Diameter Requirements | 2" or 3" | | |
| Exhaust Vent Material Requirements | PVC or CPVC | | |
| Max Vent Length with 1 elbow | 95’ with 3" or 42’ with 2" | | |
| Vent Termination Clearances to Any Building Opening (ft) | Below = 1’, Side = 1’, or Above = 1’ | | |
| Gas Supply Pressure Range | 8-14" w.c. | | |
| Min Gas Line Size | 3/4" up to 30’ | | |
| Water Pressure Rating (psi) | 15-150 | | |
| Case Clearances (in) | Top = 12", Front = 4", Sides = 2", Back = 5/8", Below = 12" | | |
| Combustion Air Requirements - using Indoor Air | 199 in² (Only if SV conversion) | | |
| Combustion Air Requirements - using Outdoor Air | 100 in²(Only if SV conversion) | | |
| Head Loss at 2 gpm | | | |
| Cold Connection Height | 3.2" | | |
| Power Consumption w/out Freeze Prevention | 172 W | | |
| Power Consumption w/Freeze Prevention | 172 W | | |
| Flow Meter Alarm | N/A | | |
| Service Reminder | N/A | | |
| Condensate Handling Method? | NC-1 | | |
| Noise Rating (dB) | Less than 60 dB | | |
| Tested to UL Computer Controlled Safety Standards | Yes | | |
| Flame Sensor | Yes | | |
| High Limit Switch | Yes | | |
| Lightning Protection | Yes | | |
| Overheat Cutoff Fuse | No | | |
| Temperature Lockout | Yes | | |
| Ignition Type | Direct Electric | | |
| Case Material | Cold Rolled Carbon Steel | | |
| Color/Finish | Grey | | |
| Flue Collar Material | | | |
| Primary Heat Exchanger Material | Stainless Steel | | |
| Secondary Heat Exchanger Material | Stainless Steel | | |
| Mounting Type | Wall Hung | | |
| Package Contents | Anchoring Screws, Wall Mounting Bracket, Emergency Kit, Owner’s Guide, Warranty, Installation Manual | | |
| Water Holding Capacity | under 2 gallons | | |
| Keypad/Thermostat Display | Included | | |
| Compatible Remote Controller Part # | P-950C (Part # NPJ089) | | |
| Isolator Valve Part # | IK-WK-200-1-XX | | |
| Freeze Protection | Yes | | |
| Freeze Protection Kit Accessory | N/A | | |
| Outdoor Vent Cap Part # | N/A | | |
| Pipe Cover Part # | N/A | | |
| Recess Box Part # | N/A | | |
| High Elevation Adjustment | Yes | | |
| Quick-Connect Cord Part # | QC-NRCP-1 | | |
| System Controller Compatible? | No | | |
| System Controller Part # | N/A | | |
| Remote Controller Cord | N/A | | |
| Compatible Remote Controller Cord Part # | | | |
| Power Cord | Included attached | | |
| |
| ENERGY STAR® Qualified | Yes | | |
| CSA | No (ETL certification) | | |
| Mobile Home | No | | |
| NSF | Yes | | |
| SCAQMD (20 ppm) | Yes | | |
| SCAQMD (55 ppm) | No | | |
| UPC | Yes | | |
| Energy Guide - Est. Yearly Energy Use | 197 gallons | | |
| Energy Guide - Est. Yearly Operating Cost | $475 | | |
| UPC Low Lead | No (NSF Low Lead tested) | | |
| ASME (HLW) | No | | |
| ASME (H) | No | | |
| ASME (NB) | No | | |
| |
| Heat Exchanger Warranty (w/out Recirculation) | 12 years | | |
| Heat Exchanger Warranty (w/Recirculation) | 12 years | | |
| Parts Warranty | 5 years | | |
| Labor Warranty | 1 year | | |
| Residential or Commercial | Residential | | |
| Installation Location | Indoor | | |
| Exhaust Type | 2-pipe Direct Vent (SV convertible) | | |
| Max Flow Rate | 10.1 GPM | | |
| Flow Rate @ 50°F Rise | 7.0 | | |
| Flow Rate @ 80°F Rise | 3.8 | | |
| Temperature Range | 100-140°F | | |
| Production Status | Active | | |
| Condensing | Yes | | |
| Minimum Activation Flow Rate | 0.5 GPM | | |
| Water Quality | Water Treatment may be needed | | |
| Freeze Protection | Yes | | |
| Freeze Protection Rating - Indoor Temp | -30°F | | |
| Freeze Protection Rating - Outdoor Temp | N/A | | |
| Recirculation Compatible? | Yes | | |
| New Generation Model Number | NRCP98 | | |
| Previous Name | N/A | | |
| Available Temperature Settings (with remote) | 100, 105, 110, 115, 120, 125, 130, 135, 140°F | | |
| Default Temperature Setting (without remote) | N/A | | |
| Default Temperature Program Setting Options (without remote) | N/A | | |
| Production Date Range | 10/14 - present | | |
| Min Gas Input (Btu) | 18000 | | |
| Max Gas Input (Btu) | 180000 | | |
| Height (in) | 28.7 | | |
| Width (in) | 17.3 | | |
| Depth (in) | 14.8 | | |
| Weight (lbs) | 85 | | |
| Thermal Efficiency | N/A | | |
| Energy Factor | UEF=0.94 | | |
| Afue | N/A | | |
| Quick-Connect Compatible? | No | | |
| Cold Water Connection Size (in) | 3/4 | | |
| Hot Water Connection Size (in) | 3/4 | | |
| Gas Connection Size (in) | 3/4 | | |
| Power Supply | 120 VAC | | |
| Current Draw (A) | 1.43 | | |
| Exhaust Vent Diameter Requirements | 2" or 3" | | |
| Exhaust Vent Material Requirements | PVC or CPVC | | |
| Max Vent Length with 1 elbow | 95’ with 3" or 42’ with 2" | | |
| Vent Termination Clearances to Any Building Opening (ft) | Below = 1’, Side = 1’, or Above = 1’ | | |
| Gas Supply Pressure Range | 8-14" w.c. | | |
| Min Gas Line Size | 3/4" up to 30’ | | |
| Water Pressure Rating (psi) | 15-150 | | |
| Case Clearances (in) | Top = 12", Front = 4", Sides = 2", Back = 5/8", Below = 12" | | |
| Combustion Air Requirements - using Indoor Air | 199 in² (Only if SV conversion) | | |
| Combustion Air Requirements - using Outdoor Air | 100 in²(Only if SV conversion) | | |
| Head Loss at 2 gpm | | | |
| Cold Connection Height | 3.2" | | |
| Power Consumption w/out Freeze Prevention | 172 W | | |
| Power Consumption w/Freeze Prevention | 172 W | | |
| Flow Meter Alarm | N/A | | |
| Service Reminder | N/A | | |
| Condensate Handling Method? | NC-1 | | |
| Noise Rating (dB) | Less than 60 dB | | |
| Tested to UL Computer Controlled Safety Standards | Yes | | |
| Flame Sensor | Yes | | |
| High Limit Switch | Yes | | |
| Lightning Protection | Yes | | |
| Overheat Cutoff Fuse | No | | |
| Temperature Lockout | Yes | | |
| Ignition Type | Direct Electric | | |
| Case Material | Cold Rolled Carbon Steel | | |
| Color/Finish | Grey | | |
| Flue Collar Material | | | |
| Primary Heat Exchanger Material | Stainless Steel | | |
| Secondary Heat Exchanger Material | Stainless Steel | | |
| Mounting Type | Wall Hung | | |
| Package Contents | Anchoring Screws, Wall Mounting Bracket, Emergency Kit, Owner’s Guide, Warranty, Installation Manual | | |
| Water Holding Capacity | under 2 gallons | | |
| Keypad/Thermostat Display | Included | | |
| Compatible Remote Controller Part # | P-950C (Part # NPJ089) | | |
| Isolator Valve Part # | IK-WK-200-1-XX | | |
| Freeze Protection | Yes | | |
| Freeze Protection Kit Accessory | N/A | | |
| Outdoor Vent Cap Part # | N/A | | |
| Pipe Cover Part # | N/A | | |
| Recess Box Part # | N/A | | |
| High Elevation Adjustment | Yes | | |
| Quick-Connect Cord Part # | QC-NRCP-1 | | |
| System Controller Compatible? | No | | |
| System Controller Part # | N/A | | |
| Remote Controller Cord | N/A | | |
| Compatible Remote Controller Cord Part # | | | |
| Power Cord | Included attached | | |
| |
| ENERGY STAR® Qualified | Yes | | |
| CSA | No (ETL certification) | | |
| Mobile Home | No | | |
| NSF | Yes | | |
| SCAQMD (20 ppm) | Yes | | |
| SCAQMD (55 ppm) | No | | |
| UPC | Yes | | |
| Energy Guide - Est. Yearly Energy Use | 197 gallons | | |
| Energy Guide - Est. Yearly Operating Cost | $475 | | |
| UPC Low Lead | No (NSF Low Lead tested) | | |
| ASME (HLW) | No | | |
| ASME (H) | No | | |
| ASME (NB) | No | | |
| |
| Heat Exchanger Warranty (w/out Recirculation) | 12 years | | |
| Heat Exchanger Warranty (w/Recirculation) | 12 years | | |
| Parts Warranty | 5 years | | |
| Labor Warranty | 1 year | | |
.jpg)
