FAQ - EZTR - Am I required to use the Flex Feeder?
Article Number: 255 | Rating: Unrated | Last Updated: Fri, Nov 21, 2014 9:00 AM
Yes.The Flex Feeder*14 piece should be utilized for every install, even those going directly vertical. While the feeder piece is designed to facilitate the Flex Pipe through the B-vent, it is also used to prevent any foreign matter (e.g. rust, dust, etc.) from entering into the flex vent.
Attachments
There are no attachments for this article.
Comments
Please add a comment if you would like to provide us with feedback about this article. We will carefully analyze your feedback and use it to improve our Articles, but we will not reply to you. If you have an issue that requires a reply, please click here to contact us. If you have an urgent matter that needs immediate assistance, please call us at 866-766-7489. Otherwise, please feel free to search our website for what you need. Thank you for choosing Noritz!
Related Articles
There are no articles in this section.
Articles in same category
FAQ - EZTR - Should I clamp the Flex pipe to the wall or ceiling?
Viewed 2852 times since Tue, Nov 11, 2014
FAQ - EZTR - Do I have to use the included 45° elbow?
Viewed 1366 times since Tue, Nov 11, 2014
FAQ - EZTR - Am I required to use the Aluminum Flex Sleeve?
Viewed 2928 times since Tue, Nov 11, 2014