Technical Articles

Advanced. Search

| Login | Search

FAQ - What do I use to run the drip line for the condensation T?

Article Number: 24 | Rating: Unrated | Last Updated: Wed, Oct 8, 2014 4:16 PM

Consult with local codes. 3/8" (1/2" on DVC) high temperature silicon rubber tubing is recommended.

Applicable Models

Models: N-042-LP, N-042-NG, N-0531S-LP, N-0531S-NG, N-063-LP, N-063-NG, N-0631S-LP, N-0631S-NG, N-063S-1-LP, N-063S-1-NG, N-063S-CAN-LP, N-063S-CAN-NG, N-063S-LP, N-063S-NG, N-069M-1-LP, N-069M-1-NG, N-069M-CAN-LP, N-069M-CAN-NG, N-069M-DV-CAN-LP, N-069M-DV-CAN-NG, N-069M-DV-LP

Attachments

There are no attachments for this article.

Comments

Please add a comment if you would like to provide us with feedback about this article. We will carefully analyze your feedback and use it to improve our Articles, but we will not reply to you. If you have an issue that requires a reply, please click here to contact us. If you have an urgent matter that needs immediate assistance, please call us at 866-766-7489. Otherwise, please feel free to search our website for what you need. Thank you for choosing Noritz!