FAQ - What is the typical amp draw for a unit?
Article Number: 66 | Rating: 3.5/5 from 11 votes | Last Updated: Mon, Oct 6, 2014 4:25 PM
|
Actual Draw in Amps* |
|||
|
Maximum amp draw |
Operation |
Standby |
Freeze Prevention |
N-0531S/NR66 |
Less than 2 Amps |
0.4 |
0.04 |
1.2 |
N-0631S/NR71 |
Less than 2 Amps |
0.5 |
0.05 |
1.2 |
N-0751M/NR98 |
Less than 2 Amps |
0.6 |
0.06 |
1.3 |
N-0841MC/NRC111/NCC199 |
Less than 3 Amps |
0.9 |
|
1.75 |
N-0931M/NR111/NC250 |
Less than 3 Amps |
1 |
0.05 |
2.1 |
N-1321M/NC380 |
Less than 4 Amps |
1.1 |
0.06 |
3.1 |
*Use of the pump control feature adds an additional 0.7 Amp draw
Also:
Power consumption and supply can be found on the spec sheet and installation manual located at http://support.noritz.com/technical-literature.php
|
Attachments
There are no attachments for this article.
Comments
Please add a comment if you would like to provide us with feedback about this article. We will carefully analyze your feedback and use it to improve our Articles, but we will not reply to you. If you have an issue that requires a reply, please click here to contact us. If you have an urgent matter that needs immediate assistance, please call us at 866-766-7489. Otherwise, please feel free to search our website for what you need. Thank you for choosing Noritz!
Related Articles
There are no articles in this section.
Articles in same category
FAQ - Will I need to increase my gas line size?
Viewed 6841 times since Mon, Oct 3, 2011
FAQ - Can the gas type of my heater be converted (NG to LPG or LPG to NG)?
Viewed 11795 times since Mon, Oct 3, 2011
FAQ - Can I vent through my chimney?
Viewed 11855 times since Fri, Sep 30, 2011