FAQ - Why won’t the heater turn on?
Article Number: 54 | Rating: 1/5 from 6 votes | Last Updated: Fri, Dec 12, 2014 3:58 PM
If the heater is not turning on, but there is a display on the remote, the filter might be clogged. Debris in the pipes from installation can clog the filter. Another possibility is reversed water connections: cold water supply connected to the hot water outlet, hot water supply line connected to cold water inlet.
If there is nothing on the display, verify that the heater is plugged in, the remote is plugged in (no damage to the wire), the outlet is receiving power, and the circuit breaker has not tripped.
A local Noritz Service Representative can be found at: http://support.noritz.com/servicereplocator.php
Attachments
There are no attachments for this article.
Comments 
Please add a comment if you would like to provide us with feedback about this article. We will carefully analyze your feedback and use it to improve our Articles, but we will not reply to you. If you have an issue that requires a reply, please click here to contact us. If you have an urgent matter that needs immediate assistance, please call us at 866-766-7489. Otherwise, please feel free to search our website for what you need. Thank you for choosing Noritz!
Add CommentRelated Articles
FAQ - What should I do if I see an error code on the remote control
Viewed times since Fri, Sep 30, 2011
Articles in same category
FAQ - Can I adjust the temperature on a heater without a remote?
Viewed 42952 times since Fri, Sep 30, 2011
FAQ - What does an 11 error code mean?
Viewed 55323 times since Fri, Dec 16, 2011
FAQ - What does an error code 12 mean?
Viewed 83105 times since Fri, Dec 16, 2011
Subscribe to Article
Print Article
Email Article to Friend
Export to PDF